A級
½" A(直徑12.7mm以內)(Within12.7mm Diameter)
節能彈簧組-打擊頭Easy Tec Punch Head
冲芯Punch
導套Punch Guide
防跳料下模Slug Free Die
Quick-Adjusting Tooling Characteristic:
1.Quick-adjusting tool of punch length.
2.Last longer tool life 2~3 times to compare ordinary tool.
3.No matter the spring pressure connect to the punch long or short, then the
pre-strength accompanies same.
4.The springs all purchase from Japan, no matter to punch thin steel plate or thick steel plate. The tension ultra may avoid jumping anticipates event and so on pulling force insufficiency. Also reduced tool damage.
5.For SECC sheel material, can be punch 4mm thickness maximum.
6.For SUS sheel material, can be punch 2mm thickness maximum.
節能彈簧組特性:
1.可快速調整到需要的尺寸
2.模具壽命增加2-3倍
3.彈簧壓力不論冲芯長或短,則預力皆相同
4.本公司彈簧皆採購自日本,不論冲打薄板
或厚板,彈力超強可避免跳料及拉力不足
等問題,也減少模具損壞
5.適用SECC板材,可冲打至4mm板厚
6.適用SUS板材,可冲打至2mm板厚